Thrust Bearings

Dimensions/Specs.
T-200-RG
View Dimensions/Specs. in HTML
View Dimensions/Specs. in PDF
Get Adobe Reader

T-200-RG: Enclosed, Double Grooved Raceways

This enclosed style round groove series is recommended for use where maximum carrying capacity is desired but thickness space available is limited. The balls are retained between two hardened steel races banded together by a mild steel or brass sleeve on the outside diameter. The double grooved raceways provide increased capacity without increasing the overall thickness of the bearing.

Auburn Enclosed Style T-200-RG Ball Thrust Bearing is recommended for use where maximum carrying capacity is desired but thickness space is limited. It is self-contained; the two races and balls are held together as a unit by the outside sleeve.

  • Ball Thrust Bearing
  • Enclosed Style
  • Self Contained
  • Round Grooves

Ball Thrust Bearing Mounting Instructions

T-114 DiagramGenerally installed with the fitted bore “A” centered on the shaft and rotating with it, the clearance bore “A'” (the race with the sleeve attached to it) seats against a fixed part of the machine and remains stationary. If installed in a recess, a clearance of 1/8" or more should be left around the outside diameter “B”, in case the shaft wears in its journal bearings. If this should happen, the clearance you allowed on the outside diameter will prevent the balls from wedging.

DIMENSIONS IN INCHES THRUST LOAD CAPACITY IN LBS. AT VARIOUS SPEEDS
Bearing
Number
A
Bore
A
Tolerance
A'
Bore
A'
Tolerance
-.000
B
Outside
Diameter
B
Tolerance
+ or -
H
Height
H
Tolerance
+ or -
Bearing
Weight
In Lbs.
5
RPM
25
RPM
100
RPM
300
RPM
500
RPM
DD-1 1 +.001 +.003 1 3/32 +.015 3 1/4 .015 7/8 .005 1.45 16015 9865 6500 4670 4005
DD-2 1 1/2 +.001 +.003 1 17/32 +.015 4 .015 1 .005 2.58 22580 13910 9165 6580 5645
DD-3 2 +.001 +.003 2 1/32 +.015 4 7/8 .031 1 1/8 .005 4.10 30120 18555 12225 8780 7530
DD-4 2 1/2 +.001 +.003 2 17/32 +.015 5 3/4 .031 1 1/4 .005 6.06 37860 23320 15365 11035 9460
DD-5 3 +.001 +.003 3 1/32 +.015 6 3/4 .031 1 3/8 .005 8.83 47000 28950 19075 13700 11750
DD-6 3 1/2 +.002 +.004 3 17/32 +.015 7 3/4 .031 1 1/2 .005 12.30 56115 34570 22775 16360 14025
DD-7 4 +.002 +.004 4 1/32 +.015 8 3/4 .031 1 5/8 .005 16.69 65750 40505 26685 19170 16435
DD-8 4 1/2 +.003 +.007 4 9/16 +.015 9 1/2 .031 1 3/4 .005 20.64 75570 46550 30670 22030 18910
DD-9 5 +.003 +.007 5 1/16 +.015 10 1/4 .031 1 7/8 .005 26.47 85475 52655 34690 24920 21365
DD-10 5 1/2 +.003 +.007 5 9/16 +.015 11 1/4 .031 2 1/4 .005 36.96 106915 65860 43390 31170 26725
DD-11 6 +.003 +.007 6 1/16 +.015 12 1/2 .031 2 1/2 .005 52.51 129585 79825 52590 37780 32395
DD-12 6 1/2 +.010 +.015 6 9/16 +.015 13 3/4 .031 2 3/4 .005 72.21 153140 94335 62150 44645 38285
402 2 +.001 +.003 2 1/32 +.015 4 1/8 .015 13/16 .005 1.85 19035 11725 7725 5550 4760
504 2 1/4 +.001 +.003 2 9/32 +.015 5 1/4 .031 1 .005 4.10 25145 15490 10205 7330 6290
508 2 1/2 +.001 +.003 2 17/32 +.015 5 1/2 .031 1 .005 3.55 18840 11605 7645 5490 4710
508F 3 11/16 +.002 +.004 3 23/32 +.015 5 1/2 .031 1 .005 3.16 17790 10960 7225 5185 4450
600 2 1/2 +.001 +.003 2 17/32 +.015 6 .031 1 7/8 .005 10.39 49825 30690 20220 14525 12445
1204 5 1/2 +.003 +.007 5 9/16 +.015 12 1/4 .031 2 1/2 .005 55.60 126990 78225 51535 37025 31695