Home » Thrust Bearings » F Series

F Metric Thrust Ball Bearing Series

Auburn Open Style F Metric Thrust Ball Bearing with Flat Raceways

The F Metric Thrust Ball Bearing Series is a high precision line of miniature thrust ball bearings that can accommodate axial loads in a single direction. The bearings in this series are designed with flat raceways and are suitable for applications with smaller load and speed requirements than that of the FM miniature thrust bearing series.

These bearings are available with bore sizes as small as 2mm (0.0787 inches) and as large as 10mm (0.3937 inches), and with the race ODs ranging from 6mm (0.2362 inches) to 18mm (0.7087 inches).

These bearings are typically manufactured with SAE 52100 chrome steel races but can be manufactured in stainless steel upon request. We also support customization of this bearing line to accommodate any special dimensional requirements.

All of the standard dimension F series bearings are manufactured in Japan, and any custom dimension versions will be manufactured at our facility in Macedon, NY, USA.

Please note: the following dimensions are shown in mm.
Bearing NumberBore (A)OD (B)Height (H)
F2-62.06.03.0Details
F2X-72.57.03.5Details
F3-83.08.03.5Details
F4-94.09.04.0Details
F4-104.010.04.5Details
F5-115.011.04.5Details
F6-126.012.04.5Details
F7-157.015.05.0Details
F8-168.016.05.0Details
F9-179.017.05.0Details
F10-1810.018.05.5Details
Other Info & Resources