Home » Thrust Bearings » SC-100 Series

SC-100 Thrust Ball Bearing Series

Auburn Totally Enclosed Style SC-100 Thrust Ball Bearing

The SC-100 Thrust Ball Bearing is totally enclosed and is recommended for use in exposed locations where protection from foreign matter is required. Its one piece design answers the need for an easily installed bearing requiring a minimum of machine work for its use.

The balls are retained between two hardened steel races banded together by a mild steel or brass sleeve on the outside diameter. The “V” grooved raceways decrease the amount of friction created by full contact round groove designs.

The SC-100 Thrust Ball Bearing is available in inch dimensions from 0.688″ through 5″ OD and 0.313″ through 2.25″ height.

Please note: the following dimensions are shown in inches.
Other Info & Resources

Mounting Instructions: The Enclosed Style SC-100 Ball Thrust Bearing is generally installed so that the race with the sleeve attached to it seats against a fixed part of the machine and is stationary.