FM Metric Thrust Ball Bearing Series
The FM Metric Thrust Ball Bearing Series is a high precision line of miniature thrust ball bearings that can accommodate axial loads in a single direction. These bearings are designed with a deep round groove on one side of the race and are suitable for applications with larger speed and load ratings than that of the F miniature thrust bearing series.
These bearings are available with inner bore sizes as small as 3mm (0.1181 inches) and as large as 10mm (0.3937) inches), and with race ODs ranging from 8mm (0.3150 inches) to 20mm (0.7874 inches).
These bearings are typically manufactured with SAE 52100 chrome steel races but can be manufactured in stainless steel upon request. We also support customization of this bearing line to accommodate any special dimensional requirements.
All of the standard dimension FM series bearings are manufactured in Japan, and any custom dimension versions will be manufactured at our facility in Macedon, NY, USA.
| Bearing Number | Bore (A) | OD (B) | Height (H) | Stock? | |
|---|---|---|---|---|---|
| F3-8M | 3.0 | 8.0 | 3.5 | Yes | Details |
| F4-9M | 4.0 | 9.0 | 4.0 | Yes | Details |
| F4-10M | 4.0 | 10.0 | 4.0 | Yes | Details |
| F5-12M | 5.0 | 12.0 | 4.0 | Yes | Details |
| F6-12M | 6.0 | 12.0 | 4.5 | Yes | Details |
| F6-14M | 6.0 | 14.0 | 5.0 | Yes | Details |
| F7-13M | 7.0 | 13.0 | 4.5 | Yes | Details |
| F7-17M | 7.0 | 17.0 | 6.0 | Yes | Details |
| F8-16M | 8.0 | 16.0 | 5.0 | Yes | Details |
| F8-19M | 8.0 | 19.0 | 7.0 | Yes | Details |
| F9-20M | 9.0 | 20.0 | 7.0 | Yes | Details |
| F10-18M | 10.0 | 18.0 | 5.5 | Yes | Details |